Red Hat ENTERPRISE LINUX AS 2.1 - Guida di Installazione Pagina 48
- Pagina / 86
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
40 Appendix B. Sample Parameter Files
To force a specific CTC protocol, additional parameters can be added. For example:
CTCPROT=<n>
where <n> is one of the following:
• 0 for compatibility mode (used with non-Linux peers other than S/390 and zSeries operating
systems)
• 1 for extended mode
• 2 for CTC-based tty (only supported on Linux-to-Linux connections)
• 3 for compatibility mode with S/390 and zSeries operating systems
PEERID=<userid>
Where <userid> represents the ID of the guest machines you want to connect to. Note that
the ID must be written in capital letters. For example, an IUCV connection to a z/VM TCP/IP
service machine would be written as:
PEERID=TCPIP
The following parameters are optional:
HOSTNAME=<string>
Where <string> is the hostname of the newly-installed Linux guest.
NETTYPE=<type>
Where <type> must be one of the following: ctc, iucv, qeth or lcs.
IPADDR=<IP>
Where <IP> is the IP address of the new Linux guest.
NETWORK=<network>
Where <network> is the address of your network.
NETMASK=<netmask>
Where <netmask> is the netmask.
BROADCAST=<broadcast>
Where <broadcast> is the broadcast address.
GATEWAY=<gw>
Where <gw> is either the gateway-IP for your eth device or the IP address of the ctc/escon/iucv
point-to-point partner.
MTU=<mtu>
Where <mtu> is the Maximum Transmission Unit (MTU) for this connection.
DNS=<server1>:<server2>:...:<serverN>
Where <server1>:<server2>:...:<serverN> is a list of DNS servers, separated by
colons. For example:
DNS=10.0.0.1:10.0.0.2
- Red Hat Enterprise Linux 4 1
- S/390® and IBM® eServer™ 1
- Table of Contents 3
- Introduction 5
- Mail backupfiles mail reports 6
- 2. How to Use This Manual 7
- 3. Accessibility Solutions 8
- Chapter 1 9
- • mount /mnt/cdrom 10
- • umount /mnt/cdrom/ 10
- 1.5. Installing under z/VM 12
- • HOSTNAME=<string> 14
- • DASD=<dasd-list> 14
- • root=<file-system> 14
- • SUBCHANNELS= 14
- • PEERID=<userid> 14
- • RUNKS=<value> 16
- Chapter 2 19
- DISPLAY= 21
- 2.3.2. Installation using VNC 22
- 2.5. Installing via NFS 23
- 2.6. Installing via FTP 23
- 2.7. Installing via HTTP 24
- 2.9. FCP Devices 25
- 2.10. Language Selection 26
- 2.11. Disk Partitioning Setup 26
- 2.12. Automatic Partitioning 28
- 2.13.2. Disk Druid’s Buttons 30
- 2.13.3. Partition Fields 30
- 2.14. Network Configuration 31
- 2.15. Firewall Configuration 34
- • http://www.redhat.com/docs/ 36
- • http://www.nsa.gov/selinux/ 36
- 2.17. Time Zone Configuration 37
- 2.18. Set Root Password 38
- 2.19. Package Group Selection 40
- 2.20. Preparing to Install 42
- 2.21. Installing Packages 42
- 2.22. Installation Complete 42
- 2.23.3. Connect Your System 43
- /usr/bin/up2date --register 44
- Appendix A 45
- Appendix B 47
- CTCPROT=<n> 48
- PEERID=TCPIP 48
- DNS=10.0.0.1:10.0.0.2 48
- Appendix C 51
- C.2. Upgrading Your System 52
- C.3. Upgrading Packages 52
- C.4. Upgrade Complete 52
- Appendix D 53
- / (root) partition 54
- /tmp/directory. The error may 54
- Appendix E 57
- Appendix F 59
- F.2. Using the zFCP Driver 60
- # zipl -V 62
- <none> 63
- /dev/sdc1 /dev/sdd1 64
- F.4.1. IPL the SCSI Disk 65
- F.5. Adding DASD 66
- F.6. Adding a Network Device 70
- • add_hhlen 71
- • broadcast_mode 71
- • buffer_count 71
- • canonical_macaddr 71
- IBM QETH 72
- <n> 75
- <n> alias ctc 77
- <n> alias netiucv 78
- Colophon 85
Prodotti e manuali riguardandi Software Red Hat ENTERPRISE LINUX AS 2.1 -
(48 pagine)Gembird MHP-EP-001-W manuali
Manuali dei proprietari e guide per l'utente per Cuffie Gembird MHP-EP-001-W.
We fornisce 1 manuali pdf Gembird MHP-EP-001-W per scaricare gratuitamente in base al tipo di documento: Scheda Tecnica
Commenti su questo manuale