Red Hat APPLICATION STACK 1.1 RELEASE Manuale Utente Scaricare il pdf (Pagina 26)

Chapter 2: Quick Configuration and Installation Instructions

not exist, the ﬁrst paragraph is the default boot kernel. To change the default, either

change the “default” line to point to the desired kernel, or move the intended kernel to

the ﬁrst position and save the ﬁle. Next, run /sbin/lilo. This should install the kernels,

givingyou a listof theboot options provided.Ifyou encounter syntaxerrors,refertothe

man page lilo.conf(5) for additional detail on the LILO conﬁguration ﬁle.

Troubleshooting

Your machine comes with XFree86 preconﬁgured for an SGI monitor. If this

X conﬁguration does not work for you, or you want to change this, run the command

XF86Setup. See the Red Hat documentation for information on starting and running X.

Errata information for the SGI Linux environment is located at the following URL:

http://support.sgi.com/linux

TheREADMEﬁleforSGILinux,whichcontainstheinformation in Chapter 1, “Software

Overview,” is located online in /usr/doc/README.sgi

Installing the SGI Linux Environment from a CD

If your machine is conﬁgured to boot from a CD, insert the CD and follow any

instructions. The Red Hat Linux 6.0 Installation Guide provides information on all of the

questions you are prompted to answer.

You will need to know information that you can obtain from your system or network

administrator,such asthe host nameof yourmachine, its primaryname andits domain,

its aliases (optional information), and its IP address. You will also need to know if your

network uses Domain Name Service (DNS), and if it does, you will need the IP address

of your name server and your default domain name for DNS. After you have obtained

this information, you may choose to write it next to the corresponding steps in this

document for future reference.

If your machine is not conﬁgured to boot from a CD-ROM, follow these steps to enable

the operating system installation from a CD:

1 2 ... 21 22 23 24 25 26 27 28 29 30

Nessun commento

Red Hat APPLICATION STACK 1.1 RELEASE Manuale Utente Pagina 26