Red Hat SYSTEM 8.0 - MIGRATION GUIDE 7.X TO 8.0 Guida di Installazione Scaricare il pdf (Pagina 35)

Upgrade Instructions  35

Upgrade Instructions: Web Security Gateway

'4' Process manager port 8084

'5' Logging server port 8085

'6' Clustering port 8086

'7' Reliable service port 8087

'8' Multicast port 8088

'9' HTTPS inbound port 8070

'N' HTTPS outbound port 8090

'M' HTTPS management port 8071

Enter the port assignment you would like to change:

‘1-9,N,M,D’ - specific port changes

‘X’ - no change

‘H’ - help

[X] >

Change a port assignment if it will conflict with another application or process on

the machine. Otherwise, leave the default assignments in place. Any new port

numbers you assign must be between 1025 and 65535, inclusive.

15. For clustering, at least two network interfaces are required. If your machine has

only one, the following prompt appears:

Websense Content Gateway requires at least 2 interfaces

to support clustering. Only one active network interface

is detected on this system.

Press Enter to continue installation and skip to Step 14.

16. If two or more network interfaces are found on this machine, you are asked

whether this instance of Content Gateway should be part of a cluster:

Websense Content Gateway Clustering Information

------------------------------------------------

'1' - Select '1' to configure Websense Content Gateway

for management clustering. The nodes in the cluster

will share configuration/management information

automatically.

'2' - Select '2' to operate this Websense Content Gateway

as a single node.

Enter the cluster type for this Websense Content Gateway

installation:

[2] >

If you do not want this instance of Content Gateway to be part of a cluster, enter 2.

If you select 1, provide information about the cluster:

Enter the name of this Websense Content Gateway cluster.

><cluster_name>

Note: All members of a cluster must use the same cluster name.

Enter a network interface for cluster communication.

Available interfaces:

<interface, e.g., eth0>

<interface, e.g., eth1>

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 43 44

Commenti su questo manuale

Nessun commento

Red Hat SYSTEM 8.0 - MIGRATION GUIDE 7.X TO 8.0 Guida di Installazione Pagina 35

Commenti su questo manuale

Prodotti e manuali riguardandi Software Red Hat SYSTEM 8.0 - MIGRATION GUIDE 7.X TO 8.0