Red Hat SYSTEM 8.0 - MIGRATION GUIDE 7.X TO 8.0 Guida di Installazione Scaricare il pdf (Pagina 36)

Upgrade Instructions: Web Security Gateway

36  Websense Web Security Gateway Anywhere

Enter the cluster network interface:

Enter a multicast group address for cluster <cluster_name>.

Address must be between 224.0.1.27 - 224.0.1.254:

[<default IP address>] >

17. For Content Gateway to act as a web cache, a raw disk must be present on this

machine. If no raw disk is detected, the following prompt appears:

No disks are detected for cache.

Websense Content Gateway will operate in PROXY_ONLY mode.

Content Gateway will operate as a proxy only and will not cache Web pages. Press

ENTER to continue the installation and skip to Step 16.

18. If a raw disk is detected, you can enable the web cache feature of Content

Gateway:

Would you like to enable raw disk cache [y/n]? y

a. Select available disks from the list. Selected disks become dedicated cache

disks and cannot be used for any other purpose. Cache disks must be raw.

Aggregate disk cache size should not exceed 147 GB.

Select available disk resources to use for the cache.

Remember that space used for the cache cannot be used for

any other purpose.

Here are the available drives

(1) /dev/sdb 146778685440 0x0

Note: The above drive is only an example.

b. Indicate if you want to add or remove disks individually or as a group.

Choose one of the following options:

'A' - Add disk(s) to cache

'R' - Remove disk(s) from cache

'S' - Add all available disks to cache

'U' - Remove all disks from cache

'X' - Done with selection, continue Websense

Content Gateway installation.

Note

If you choose to not enable raw disk cache now, cache

disks may be added after Content Gateway has been

installed. For instructions, see Content Gateway Manager

Help.

Warning

Although it might be listed as available, do not use an

LVM (Logical Volume Manager) volume as a cache disk.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42 43 44

Nessun commento

Red Hat SYSTEM 8.0 - MIGRATION GUIDE 7.X TO 8.0 Guida di Installazione Pagina 36